Log Home Restoration: Quick Tip

It is a good idea to apply a chlorine solution to the logs after stripping. Although the stripping process will remove any mold or mildew  that is visable, the spores can remain in cracks and checks that the stripper may not have reached. Once the new finish is applied it very likely the spores will grow and spread underneath the stain. This is evidenced by black spots appearing. If it can be removed by applying chlorine, then it is on the surface of the log and not a big problem.  However, if it can not be removed, it is under the finish. If that is the case, the only solution is to strip again. So, it is well worth the time it takes to apply chlorine. For more log home restoration tips click here.

Consider This When Sealing a Newly Constructed Log Home

Newly constructed log homes are usually stained and sealed as soon as the “dry in” is completed or shortly thereafter. Nothing wrong with that right? Well here are a few things that should be considered before applying a beautiful natural wood finish to your brand new log home.  (Learn More)

Log Home Restoration: Quick Tip

Mid summer and “the heat is on.”   The warmer months are the better months to apply sealers. However, on hot sunny days, the side of a log home, or deck for that matter, can get very hot. Too hot to apply a finish. If the wood gets too hot the stain can ” flash” making the carrier of the stain evaporate to quickly. This will keep the finish from absorbing properly and therefore preform poorly. In these conditions, it is best to always work on the shady side of the log home.